FIPA Vacuum cups: Process-oriented, fast, reliable

Ø 1 mm to Ø 3 mm: PU = 10 pieces

Very shallow cup with single-lip seal for handling various products with smooth or rough surfaces.

Connection up to Ø 50 mm by means of plug-in nipple, from Ø 60 mm with vulcanized carrier plate (boltable).

• Great stability allows high acceleration
• Fast cycle times are possible, due to the cup’s low volume
• Cost-effective replacement of worn seals

Flat vacuum cups for smooth surfaces especially suitable for removing hot plastic parts to be painted from an injection molding machine. Thermalon® is a material mixture optimized for the plastics industry with a hardness of 60° Shore A.

Connection up to Ø 50 mm by means of plug-in nipple, from Ø 60 mm with vulcanized carrier plate (boltable).

• Extremely low-marking
• Free of silicone and other paint-wetting-impairment substances (PWIS)
• Great stability allows high acceleration

Robust, round NBR flat vacuum cups, 60° Shore A with vulcanized fitting made of aluminum and large area, multi-part "anti-slip" cleats.

Various connection threads available.

Silicone-free.

• Reliable, non-slip handling of oily sheets due to "anti-slip" cleats. Good absorption of lateral forces

• Supports help to prevent deep-drawing or deformation of thin sheets

• Leak-free suction even with slightly curved surfaces due to flexible sealing lip

• Vulcanized connection thread ensures a secure fit

Bellow suction cups made of FDA-approved material for handling delicate products with heavily textured surfaces.

• Gentle handling of the most sensitive surfaces
• Also suitable for three-dimensional products, e.g. chocolates

Flat vacuum cups with a soft, very flexible single-lip seal for handling highly sensitive products.

Connection via plug-in nipple.

Compatible "snap-in" suspensions available.

• Gentle product handling
• Very good fit to the product surface
• Good seal over a slightly rough surface
• Low volume of the cup enables fast cycle times
• Cost-effective replacement of worn seals

Universal flat vacuum cups with tapering curved sealing lip.

Connection via plug-in nipple.

• Pre-tension of the sealing lip enables gripping of uneven and slightly curved products
• Large
stroke

Flat vacuum cups for handling sensitive or uneven and slightly curved products. Long, slim design enables pipe mounting and low gimbal leveling for uneven product surfaces.

• Gentle handling of particularly sensitive products
• Cost-effective replacement of worn seals

Universal flat vacuum cup in even, supported or deep design.

Design: Replacement sealing lip for attachment to fitting.

• High suction force
• Fast cycle times possible
• Very resistant to wear (Tepuflex®)
• Compatible with established products from other vendors

Universal flat vacuum cups in even or supported design. Series with sensing valve prevents dropping of the product if individual vacuum cups in a system are not in contact with the product.

Version: Complete with vacuum cup fitting and filter screen.

• High suction force
• Fast cycle times possible
• Very resistant to wear (Tepuflex®)
• Compatible with established products from other vendors

Flat vacuum cups with safety sealing lips to handle rough surfaces, as well as smooth but very uneven products.

Connection via an interlocking, snap-in aluminum plate.

• Leak-free gripping of many difficult product surfaces thanks to extremely flexible thinly tapered sealing lip
• High stability under lateral forces
• Optimum process reliability due to additional double lip seal
• Cleats help prevent warping of the product
• Cost-effective tool-free changing of worn seals

Elastomer seal and carrier plate 270.380 must be ordered separately

Task: Access the top layer of porous materials without carrying along the lower layers.

Simultaneous intake (outer chamber) and selective blowing in a separate central chamber breaks adhesive forces between the layers.

The unwanted take-up of lower layers is prevented.

The air pressure level should be between 1 and 3 bar (14.5 and 43.5 psi) and is dependent on the nature of the product.

Flat vacuum cups with dual internal safety sealing lip as well as vulcanized carrier plate made of aluminum.

• High process reliability through multiple sealing lip
• Excellent lateral stability due to vulcanized carrier plate, as well as rubberized support surfaces for the product

Flat vacuum cups with a minimum stroke for flat surfaces. HNBR version especially suited for removing hot plastic parts from an injection molding machine, as they are silicone-free and temperature-resistant up to 160 °C (320 °F).

SFK-G series particularly suitable for clamping elements. Connection via a form-locking, snap-in aluminum plate.

• Great suction power thanks to the largest active vacuum suction surface possible
• Minimized wear, as the suction lip does not slide over the product during suction
• Low space requirement
• Cost-effective replacement of worn seals

Heavy-duty vacuum suction plate for both smooth and rough surfaces such as metal sheets, cut marble, granite, precast concrete, metal plates or rough-sawn wood. Central mounting connection – lateral vacuum port.

• Vulcanized steel carrier plate allows lifting of very heavy loads
• Secure gripping of uneven surfaces thanks to additional inner sealing lip
• Lateral vacuum connection

Flat vacuum suction plate with a soft, foamed sealing lip made of EPDM. The sealing lip snaps (form-locking) into a support plate.

• Good sealing of heavily textured surfaces
• Cost-effective replacement of worn seals